Body
Premier émulateur d'Atari Jaguar à être compatible avec tout le catalogue commercial de la console.
BigPEmu version 1.16
Mise à jour
- Logos
- Logos
- Logos
- Logos
Version
1.16
Fiche ios
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
PPSSPP version 1.18.1
Mise à jour
- Logos
- Logos
- Logos
- Logos
- Logos
- Logos
Version
1.18.1
Body
PPSSPP est un émulateur PSP open-source.
Fiche ios
Lien Appstore
Lien sideload
Présent sur Altstore
No
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
ares version 141
Mise à jour
- Logos
- Logos
- Logos
- Logos
- Logos
Version
141
Body
Parti de Bsnes et Higan développé par feu Near (se dénommant précédement Byuu), Ares est un émulateur multi-machines repris par Luke Usher et d'autres permettant d'émuler un certains nombres de mac
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
Folium version 1.13
Mise à jour
- Logos
Version
1.13
Body
Multi-émulateur open source iOS de Nintendo GBA, DS et 3DS.
Fiche ios
Lien Appstore
Lien sideload
Présent sur Altstore
No
OpenRCT2 version 0.4.16
Mise à jour
- Logos
- Logos
- Logos
- Logos
- Logos
Version
0.4.16
Body
Avec cet interpréteur vous allez pouvoir rejouer à Roller Coaster Tycoon 2 moyennant le fait d'avoir les fichiers originaux.
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
RPCS3 version 0.0.34 Alpha (auto build)
Mise à jour
- Logos
- Logos
- Logos
- Logos
Version
0.0.34 Alpha (auto build)
Body
Émulateur expérimental de Sony Playstation 3 écrit en C++ demandant un Mac sous OS 11.6 minimum. Des builds automatiques sont disponibles sur le site.
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
DuckStation version 0.1-7675
Mise à jour
- Logos
- Logos
- Logos
- Logos
- Logos
- Logos
Version
0.1-7675
Body
Jeune émulateur opensource de Playstation utilisant Qt5 et la SDL2.
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
Cemu version 2.3
Mise à jour
- Logos
- Logos
- Logos
- Logos
- Logos
- Logos
Version
2.3
Body
Emulateur Nintendo Wii-U. Actuellement le seul à faire tourner des jeux commerciaux comme Zelda Breath of the wild.
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
gzDoom version 4.13.2
Mise à jour
- Logos
- Logos
- Logos
- Logos
- Logos
Version
4.13.2
Body
zDoom, désormais GzDoom et ayant une alternative nommée LzDoom permet de rejouer dans de bonnes conditions à Doom, Doom II, Heretic, Hexen et autres, à condition d'avoir les données ori
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
shadps4 version 0.4
Mise à jour
- Logos
- Logos
- Logos
- Logos
Version
0.4
Body
Un émulateur de PS4 qui a déjà des jeux jouables.
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
PCSX2 version 2.2.0
Mise à jour
- Logos
- Logos
- Logos
- Logos
Version
2.2.0
Body
Émulateur PS2 actuellement le plus évolué disponible pour macOS.
Des builds nightlies plus récentes sont également disponibles.
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
MAME version 0.271
Mise à jour
- Logos
- Logos
- Logos
- Logos
- Logos
- Logos
- Logos
- Logos
- Logos
- Logos
Version
0.271
Body
C'est l'émulateur Arcade incontournable. Seules les sources sont officiellement disponibles.
Fiche ios
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
DingusPPC version Alpha 1.01
Mise à jour
- Logos
- Logos
- Logos
Version
Alpha 1.01
Body
Émulateur expérimental de PowerPC en cours de développement.
Lime3DS version 2119
Mise à jour
- Logos
- Logos
- Logos
- Logos
Version
2119
Body
Fork de Citra.
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
b2 version b2-20241028-215441-a8b4f2a
Mise à jour
- Logos
- Logos
- Logos
- Logos
Version
b2-20241028-215441-a8b4f2a
Body
Emulateur BBC Micro. Des builds pour Mac OS X demandant 10.9 minimum sont disponibles sur le site, ainsi que des version pour Mac Intel.
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
Plus42 version 1.1.13
Mise à jour
- Logos
- Logos
- Logos
- Logos
- Logos
Fiche ios
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
Free42 version 3.1.9
Mise à jour
- Logos
- Logos
- Logos
- Logos
- Logos
Version
3.1.9
Body
Emulateur de calculatrice HP modèle HP-42S et de l'imprimante HP-82240. macOS 10.9 Minimum.
Fiche ios
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
Pcsx-Redux version auto build
Mise à jour
- Logos
- Logos
- Logos
- Logos
Version
auto build
Body
Fork de PCSX compatible macOS 10.15 (Catalina) minimum. Un wiki pour la compilation est disponible sur le github.
fheroes2 version 1.1.3
Mise à jour
- Logos
- Logos
- Logos
- Logos
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
Play! version 0.67
Mise à jour
- Logos
- Logos
- Logos
- Logos
- Logos
Version
0.67
Body
Nouvel émulateur Playstation 2 et arcade Namco System 2X6, celui-ci en est a ses débuts.
Fiche ios
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
Ryujinx version r.49574a9
Mise à jour
- Logos
- Logos
- Logos
- Logos
- Logos
Version
r.49574a9
Body
Émulateur opensource expérimental de Nintendo Switch écrit en C#.
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
NooDS version auto build
Mise à jour
- Logos
- Logos
- Logos
Version
auto build
Body
Émulateur Nintendo DS et Game Boy Advance écrit en C++ ayant pour objectif la rapidité d'exécution.
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
Flycast version 2.4
Mise à jour
- Logos
- Logos
- Logos
- Logos
- Logos
- Logos
Version
2.4
Body
Dérivé de l'émulateur nommé reicast, Flycast émule la Dreamcast ainsi que les jeux Naomi et Atomiswave. Attention, le support des jeux utilisant WinCE est très faible.
Fiche ios
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
cloudpilot version 1.10.5
Mise à jour
- Logos
- Logos
- Logos
Version
1.10.5
Body
Émulateur des différents PDA (ordinateurs de poche) de Palm jusqu'à Palm OS 4.0 fonctionnant en mode client serveur.
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
DosBox Staging version 0.82.0
Mise à jour
- Logos
- Logos
- Logos
- Logos
- Logos
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
0.82.0
Summary¶
Just six short months after our monstre 0.81.0 release, we’re back with another big one that adds Pentium MMX emulation, ESS Enhanced FM Audio, numerous audio related enhancements, a large number of game compatibility fixes, improved Windows 3.1x compatibility, experimental Windows ARM64 support, and a lot more!
Read on to learn more!
Downloads¶
Start by downloading the 0.82.0-RC release candidate:
For those upgrading from an earlier DOSBox Staging version, please follow the upgrade instructions below.
First-time users and people migrating from other DOSBox variants should start by reading the Getting started guide.
How to upgrade¶
Upgrading your primary configuration¶
Since config settings might be renamed, altered, or deprecated between releases, it’s best to let DOSBox Staging write the new default primary config on the first launch, then reapply your old settings manually.
Start by backing up your existing primary config. This is where to find it on each platform:
Windows
C:\Users\%USERNAME%\AppData\Local\DOSBox\dosbox-staging.conf
macOS
~/Library/Preferences/DOSBox/dosbox-staging.conf
Linux
~/.config/dosbox/dosbox-staging.conf
You can also execute DOSBox Staging with the --printconf option to have the location of the primary config printed to your console.
After backing up the existing primary config, simply start the new version—a new dosbox-staging.conf will be written containing the new defaults and updated setting descriptions.
Portable mode notes
In portable mode, dosbox-staging.conf resides in the same folder as your DOSBox Staging executable. The migration steps for portable mode users are as follows:
- Unpack the new version into a new folder (this is important).
- Create a new empty
dosbox-staging.conffile in the new folder to enable portable mode. - Launch the new version.
DOSBox Staging will write the new defaults to the empty dosbox-staging.conf file. After this, you carry over your settings from the old primary config manually.
After upgrading¶
Look for deprecation warnings in the logs (in yellow or orange colour) and update your configs accordingly.
Game compatibility fixes¶
- Fix regression in Command & Conquer: Red Alert where the emulator crashed after playing the game for a while.
- Fix regression in The Magic Candle 2: The Four and Forty where the second MIDI sequence did not play.
- Fix regression in Soltys where the Gravis UltraSound was not starting up after the game auto-detected it.
- Fix Dunkle Schatten 2 freezing after startup.
- Fix distorted HUD issue in the 3dfx version of Archimedean Dynasty.
- Fix the odd horizontal black lines appearing in the following Synthetic Dimensions games:
- Chronicles of the Sword
- Druid: Daemons of the Mind
- Perfect Assassin
- Generically fix all Windows 3.1x games that complain about enabling file sharing, asking the user to run
SHARE.EXE. This fixes at least the following games:- Comix Zone
- Garfield Caught in the Act
- Microsoft Flight Simulator (v5.0, ATC Workshop)
- Monopoly
- Ultimate Yahtzee
- Fix the intro tune in Bumpy’s Arcade Fantasy using the wrong instruments on the MT-32.
- Fix the AdLib intro jingle not playing in Silmarlis games (e.g., Crystals of Arborea, Ishar 1 & 2, Storm Master, Transantartica, etc.)
- Fix flipped Sound Blaster Pro 2 output filter behaviour in Doom and all games that toggle the filter programmatically.
Note
Graphics¶
Remove the ‘openglnb’ output mode¶
The openglnb output mode for OpenGL with nearest-neighbour interpolation has been removed (nb stood for “no bilinear”, which is a roundabout way to say “nearest-neighbour interpolation”).
When using CRT shaders or any other shader, openglnb and opengl worked exactly the same way—there was zero reason for preferring openglnb over opengl.
The only legitimate use-case for openglnb was to get nearest-neighbour interpolation with uneven pixels when not setting any shader explicitly. This was a relic from the past from pre-shader times when you had to select between two bad options when aspect-ratio correction was enabled: blurry output (with bilinear filtering) or sharp output at the expense of uneven pixels (with nearest-neighbour, or “no bilinear” interpolation). The much better current solution in DOSBox Staging if you want the “sharp pixel” look is to use the sharp shader.
If you really want to, you can still use nearest-neighbour interpolation with the new nearestshader. But you’ll get far better results with sharp, especially on 1080p displays.
The texturenb output mode remains available as a last resort fallback for weak hardware with no functional OpenGL drivers.
New xBR upscaler shaders¶
A few of Hyllian’s xBR upscaling shaders have been added for those hell-bent on playing games with a fake high-resolution look:
scaler/xbr-lv2-3dscaler/xbr-lv2-noblendscaler/xbr-lv3
Voodoo fixes¶
16-bit memory writes have been fixed in our Voodoo emulation; this resolves the distorted HUD issue in the 3dfx version of Archimedean Dynasty.
S3 Trio64 improvements¶
- Fixed the hardware cursor handling on the S3 Trio64 card; this fixes the display corruption on exit issue in the Teddybear’s Revenge demo by Eclipse.
- Implemented the missing S3 Trio64 XGA compare and fill routines. This lets you use version 1.70.04 of the S3 Trio64 drivers in Windows 3.1x without issues and resolves graphical glitches in Windows 3.1x games that use XGA features, such as the demo of Critical Mass. This change improves general compatibility with games that use WinG as well.
- Now we use linear 128 KB video memory pages for all VESA modes. Some games exploit this low-level detail of some SVGA cards to access the video memory as a single contiguous 128 KB memory block instead of manually flipping between two 64 KB pages. This enhancement gets rid of the odd horizontal black lines in the following Synthetic Dimensions games and possibly in other games and demoscene productions too that use the same hack:
- Chronicles of the Sword
- Druid — Daemons of the Mind
- Perfect Assassin
Full PR list of graphics-related changes
Sound¶
Multi-threaded audio processing¶
Some audio devices, such as the MT-32 and FluidSynth, were already running in their own threads. We’ve taken this to the next level, and now the DOSBox mixer itself has got its own dedicated thread, too. This greatly reduces and often completely eliminates audio stuttering and glitches. The improvement is especially noticeable in games that use the Roland MT-32 or FluidSynth for MIDI music, the AdLib/OPL synth, the IBM Music Feature Card (IMFC), or Red Book CD Audio.
For example, now you should get zero glitches in the intro of Eric the Unready on the MT-32 when the game repeatedly switches between 320×200 and 640×480 VGA modes.
We plan to take this approach even further in the following releases, with the ultimate goal of achieving a 100% glitch-free, hardware-like audio experience.
ESS Enhanced FM Audio (ESFM) emulation¶
DOS audio connoisseurs, we have a real treat for you! We’ve added support for emulating ESS Enhanced FM Audio, or ESFM, the OPL3-compatible FM synth found on later ESS AudioDrive cards.
In “legacy mode”, ESFM is fully compatible with the Yamaha OPL3; on most materials, it yields almost identical output (with the occasional subtle difference). What sets it apart is its “native mode”, in which it offers advanced synthesis features surpassing the capabilities of the OPL3 chips. It bridges the gap between synthetic-sounding OPL music and MIDI music that uses sampled real instruments—it definitely makes those expensive external MIDI modules run for their money!
Unfortunately, since ESFM was released in 1995, only a handful of games support “native mode,” but in the few that do, the results sound quite spectacular!
- To run ESFM in “legacy mode”, use
oplmode = esfmwith any Sound Blaster model and configure the game for Sound Blaster and AdLib/OPL as usual. - To use “native mode”, set
sbtype = essand configure the ESS Technology ES1688, ES1788, ES1888 Enhanced FM Audio MIDI music driver in the game’s setup utility (most games that support ESFM natively use the Miles Sound System). For the digital audio driver, select the Sound Blaster Pro option (ESS AudioDrive cards are Sound Blaster Pro compatible).
Here’s a non-exhaustive list of games that support ESFM Enhanced FM music. If you discover more, please let us know!
- 11th Hour, The
- Advanced Civilization
- Callahan’s Crosstime Saloon
- Gene Machine, The
- Heaven’s Dawn
- Heroes of Might and Magic II
- Magic Carpet 2
- Settlers II, The
- Shannara
- Theme Hospital
- WarCraft II
- Z
GameAudio example
Heroes of Might and Magic II — Title (ESFM)
Heroes of Might and Magic II — Title (OPL)
Heroes of Might and Magic II — In-game (ESFM)
Heroes of Might and Magic II — In-game (OPL)
The Settlers 2 — Track 5 (ESFM)
The Settlers 2 — Track 5 (OPL)
The Settlers 2 — Track 14 (ESFM)
The Settlers 2 — Track 14 (OPL)
The Gene Machine (ESFM)
The Gene Machine (OPL)
Heaven’s Dawn (ESFM)
Heaven’s Dawn (OPL)
The more adventurous among you can also try to “retrofit” the ESFM.MID driver from Miles Sound System games that have it into earlier ones that don’t.
Here’s how Discworld sounds with the ESFM driver from Heaven’s Dawn—it’s pretty great, sounds almost like sample-based music!
Discworld (ESFM)
Discworld (OPL)
AdLib/OPL DC bias remover¶
Some games like Golden Eagle and Wizardry VI: Bane of the Cosmic Forge play digitised music and sound effects using the OPL (AdLib) channels by rapidly changing the volume in very crude steps, similar to how the Disney Sound System and Covox LPT DAC operate.
We’ve introduced a new opl_remove_dc_bias config setting to the [sblaster] section, eliminating these annoying pops in affected games.
Recommended audio settings for Wizardry VI: Bane of the Cosmic Forge when configured for AdLib sound:
[sblaster]
sbtype = none
oplmode = opl2
opl_remove_dc_bias = true
opl_filter = lpf 2 5500
[speaker]
pcspeaker = off
[autoexec]
mixer opl 500
Default to the ‘impulse’ PC speaker model¶
The impulse PC speaker model has been made the default option as it emulates the iconic little speaker found in old PCs more faithfully and with fewer overall issues.
The catch is that a small percentage of games have problems with it, so you might need to revert to the legacy and less accurate discrete model on a per-game basis.
Decouple CMS and AdLib/OPL emulation¶
The CMS (Creative Sound System or Game Blaster) and OPL (AdLib) emulations have finally been decoupled. DOSBox always treated the emulation of the CMS as “just another OPL option”, which was completely wrong as the AdLib and the CMS use different sound chips and have nothing to do with each other.
This resulted in various complications, such as oplmode = opl2 always enabling CMS emulation as well (probably to allow emulating early Sound Blaster cards that featured both the OPL2 and CMS chips).
The new model allows the user to control the OPL and CMS emulations separately:
oplmodeonly determines the type of OPL chip(s) to emulate. Valid values arenone,opl2,dualopl2,opl3, andopl3gold.- The new
cmsconfig setting in the[sblaster]section controls whether to emulate the CMS. Valid values areonandoff.
Warning
As usual, oplmode = cms is still accepted with a deprecation warning, but you should update your configs to use the new model as we might remove support for the legacy settings in the future.
Sound Blaster Pro 2 output filter fix¶
Previously, toggling the analog output filter programmatically on the Sound Blaster Pro 2 (sbtype = sbpro2) was flipped due to a coding error. You can hear the difference in games that toggle the filter, such as Doom, when configured for the SB Pro 2 and authentic output filter emulation is enabled with sb_filter = auto.
AdLib/OPL improvements¶
The OPL (AdLib) chip is now initialised with the official AdLib v1.51 driver’s startup values instead of the chip’s native power-on state. Most games don’t care about this because they fully overwrite the card with whatever state they need at startup, but this fixed the missing intro jingle in the following Silmarils games:
- Boston Bomb Club
- Bunny Bricks
- Crystals of Arborea
- Ishar 1
- Ishar 2
- Metal Mutant
- Storm Master
- Transantartica
Further mixer improvements¶
- Fix lower-pitched audio bug when the emulated audio device’s sample rate exceeds the host sample rate. E.g., if a program uses the maximum native 45 454 Hz Sound Blaster rate and the host rate is 44 100 Hz.
- Host sample rates can now be set continuously from 8000 Hz to 96 kHz. This makes DOSBox Staging fully placebo and audio snake oil compliant!
Also, by setting custom sample rates, you can capture audio at an emulated device’s native rate without resampling. blocksizecan now be set to non-power-of-two values, too.- The
nosoundoption now works better because it renders the audio and progresses the audio frames rendered counters (e.g., FastTracker II now plays the module even in “no sound” mode; previously, it was completely stalled). Additionally, you can now capture the audio to a WAV file even in “no sound” mode.
Other audio improvements¶
- The Gravis UltraSound and Sound Blaster can coexist now when you run
ULTRINIT.EXE. This way, you can use the SB for digital sound effects and GUS for MIDI music viaULTRAMID.EXEorMEGAEM.EXEin supported games. - Turn off the “cable delay” emulation MIDI for the MT-32. This fixes the intro tune in Bumpy’s Arcade Fantasy, and probably other game startup issues, too.
- Use 16-bit integer rendering mode for the MT-32 which is more accurate to the real hardware and much faster. Also, use “nice” partials mode and render at libmt32’s 48 kHz “analog emulation” rate for improved authenticity.
- Map the Capture MIDI action to Ctrl+Alt+F6 by default (Cmd+Option+F6 on macOS).
- Reading audio data from physical CD-ROMs is now done in a separate thread, which should eliminate latency and stuttering issues.
- Windows CD-ROM audio is now routed through the DOSBox mixer, bringing it to feature parity with Linux.
- Fix no CD Audio issue on Windows if using a USB CD drive (SATA drives worked fine).
- The strength of the
tinyreverb preset has been reduced by 25% as it sounded too strong; now it simulates the natural reverberation of a domestic room better.
Full PR list of sound-related changes
Input¶
- Fix hang on exiting DOSBox Staging after pressing the Pause key.
- General keyboard handling accuracy improvements, allowing us to get rid of the Ultima VIII game-specific hack.
Full PR list of input-related changes
DOS integration¶
New MODE command¶
A new MODE command has been added to set the display mode of the DOS prompt and the keyboard’s typematic rate. The command is loosely based on the original MS-DOS MODEcommand, but it supports a lot more display modes.
Examples of setting a custom text mode:
mode 80x30
mode 80x43
mode 132x34
Setting the fastest key repeat with the shortest repeat delay (everybody’s favourite):
mode rate=32 delay=1
Run mode /? to see the full list of options.
File sharing support¶
Certain Windows 3.1x programs that rely on SHARE.EXE or VSHARE.386 would display an error on startup, complaining that SHARE.EXE has not been loaded. This mostly affects office programs (e.g., Microsoft Office, Lotus Office, Peachtree Complete Accounting, etc.), but also a few games.
The previous workaround was to rely on a small utility called FAKESHAR.COM which, as the name implies, fakes that SHARE.EXE is running. This worked mostly fine with games but could lead to data corruption when using application programs.
We’ve added support for file sharing and locking, which means workarounds likeFAKESHAR.COM are no longer necessary. All Windows 3.1x games that complain about SHARE.EXE not running should now work out-of-the-box. This fixes at least the following games:
- Comix Zone
- Garfield Caught in the Act
- Microsoft Flight Simulator (v5.0, ATC Workshop)
- Monopoly
- Ultimate Yahtzee
Improved physical CD-ROM mounting¶
Physical CD-ROM devices are now auto-detected when using the MOUNT command—no more need to use the additional clunky -usecd parameter (this has been removed).
For example:
- Windows:
mount d d:\ -t cdrom - Linux:
mount d /mnt/cdrom -t cdrom
Other DOS integration improvements¶
LOADFIXcan now be used with batch files.- Fix improper handling of some special characters in shell history.
- Improve redirection handling in the DOS shell. This helps with a few game installers (e.g., running the B-Wing Add-On installer for X-Wing corrupted the game files without this fix).
- More accurate System File Table (SFT) emulation. This helps with some game compatibility issues, e.g. Dunkle Shatten 2 was freezing without this fix.
- The
DEBUGandXCOPYcommands from FreeDOS have been updated to their latest versions.
Full PR list of DOS integration related changes
General¶
Pentium MMX emulation¶
Finally, we’ve added Pentium MMX instruction set emulation to run late-90s demoscene productions (e.g., heaven seven by Exceed) and the odd game with MMX-specific enhancements (e.g., Extreme Assault and Z.A.R.). And yeah, now you can use the MMX-only real-time resonant filters in Impulse Tracker, too
You must enable MMX emulation explicitly by setting cputype = pentium_mmx in your config. All normal and dynamic cores are supported on all platforms.
Simplified CPU cycles settings¶
The cycles setting has been a source of a lot of confusion, so we’ve replaced it with a much simpler way to configure the emulated CPU speed (believe it or not, there are over 20 valid cycles value permutations!)
The new streamlined CPU cycles settings are as follows:
cpu_cycles— Global or real mode only cycles setting.cpu_cycles_protected— Optional protected mode only cycles setting.cpu_throttle— Whether the CPU emulation should be dynamically throttled if your host CPU cannot keep up.
Please refer to the settings’ descriptions to learn more (e.g., run config -h cpu_cyclesfrom the DOS prompt).
Here are a few concrete examples:
Set fixed speed globally
This will roughly emulate the speed of the venerable i486DX2-66 in both real and protected mode. cpu_cycles_protected = auto means cpu_cycles controls the emulated CPU speed globally, both for real and protected mode.
[cpu]
cpu_cycles = 25000
cpu_cycles_protected = auto
Different real and protected mode speeds with throttling
20k cycles for real mode programs, and 400k for protected mode. Throttling is enabled, so if your host machine can’t keep up, the actual number of emulated CPU cycles per millisecond will be dynamically lowered.
[cpu]
cpu_cycles = 20000
cpu_cycles_protected = 400000
cpu_throttle = on
Max speed
This will make the CPU emulation run as fast as your computer can handle it. Pretty useful when compiling programs, rendering 3D images, or playing late ’90s 3D games at 640×480 or higher resolutions (as long as they can run glitch-free on very fast CPUs).
[cpu]
cpu_cycles = max
cpu_cycles_protected = max
Backward compatibility with cycles
The legacy cycles setting is still available for backward compatibility with existing configs. When cycles is set, the new CPU settings are simply ignored. Do note, however, that we might remove support for cycles in the future; please start migrating your configs to the new settings now.
Revised CPU cycles defaults¶
Summary of changes
- The default emulated CPU speed (cycles) setting for protected mode programs has been changed from max to 60 000 cycles.
- The real mode default of 3000 cycles is unchanged.
- When “legacy cycles mode” is enabled by setting
cyclesexplicitly, the old “max cycles” protected mode default applies.
DOSBox traditionally defaulted to 3000 cycles for real mode programs, and “max cycles” (as fast as your host CPU can go) for protected mode programs. 3000 cycles for real mode is a good middle-of-the-road setting that gets most games running (even if not optimally). The “max cycles” setting, on the other hand, is quite problematic for a couple of reasons:
- A significant number of games crash, misbehave, or manifest subtle bugs when the emulated CPU is “too fast”. In the early days of DOSBox,
cycles = maxwas not a problem because the much slower host CPUs from 10-20 years ago acted as a “natural throttle” on the effective emulation speed. However, many of those old speed-sensitive games that used to work withcycles = maxare now broken on today’s fast CPUs. - The
maxsetting is not transferable across setups as it depends on the host CPU’s speed. Games configured forcycles = maxmight work fine on your particular machine, but they could break on your friend’s faster computer or yours a few years later when you get your next CPU upgrade. Themax N%cycles setting (e.g.,max 70%) is plagued by the same problem. cycles = maxoften causes audio glitches and drop-outs in games. It’s best to use the lowest fixed cycles value that runs the game at an acceptable speed (read more tips about that here).- Some DOS programs really freak out when the emulated CPU is being dynamically changed at runtime, which is what
maxtends to do.
All in all, max for protected mode is not a good default in 2024, so we’ve changed it to fixed 60 000 cycles, which is roughly equivalent to slow Pentium speeds. As protected mode games started appearing in the early to mid-90s, this should run the vast majority of games fairly optimally out-of-the-box.
‘cputype’ normalisation¶
After introducing the pentium_mmx CPU type, we felt the need to clean up the cputypeoptions a bit and make them more logical:
386_slowhas been renamed to386386has been renamed to386_fast486_slowhas been renamed to486pentium_slowhas been renamed topentium
Please refer to the description of the cputype setting for further info (e.g., execute config -h cputype from the DOS prompt).
The descriptions of all CPU settings have been extensively revised and now include helpful hints, so it’s recommended that you familiarise yourself with them (run config -h cpu to see the complete list of CPU settings).
Warning
The old renamed cputype values are still accepted with a deprecation warning, but you should update your configs to use the new values, as we might remove support for the legacy settings in the future.
Improved CONFIG command¶
The CONFIG command’s output is now paginated when you use it to display a config setting’s description (e.g., config -h glshader of config -h cpu_cycles). Previously you had to pipe the output through the MORE command to paginate the output, which was a hassle (i.e., config -h glshader | more).
The formatting and colouring of the CONFIG command’s output has also been improved.
Configurable window title bar¶
You can now fully customise the information displayed in the emulator window’s title bar.
For example, this configuration
[sdl]
window_titlebar = program=none version=detailed mouse=short
yields the following to be displayed in the title bar:
DOSBox Staging 0.82.0-alpha (9fdba) - 3000 cycles/ms
An animated audio/video capturing indicator and a pause indicator has also been added.
Please refer to the window_titlebar setting’s description to learn about the available options (e.g., run config -h window_titlebar from the DOS prompt).
Read-only directory mounts¶
The MOUNT command now accepts the -ro flag to create read-only (write-protected) directory mounts (the IMGMOUNT command already had this option).
For auto-mounts, you can specify readonly = true in the [drive] section of the mount config file (see resources).
Additionally, the built-in Y drive has been made read-only by default (you can change this in resources/drives/y.conf, of course, if you want to).
Experimental Windows ARM64 builds¶
We’re ready for the ARM revolution!
Luckily, we already have a battle-tested dynamic ARM recompiler that we’ve been using for the Apple Silicon macOS builds, so we started providing experimental Windows ARM64 packages for devices such as the Snapdragon X Elite.
The ARM64 packages can be downloaded from our development builds page (requires a GitHub account).
We don’t provide any official support for the experimental Windows ARM64 builds yet.
Other general improvements¶
- The IPX server has been moved into its own dedicated thread. This should improve multi-player game performance, especially for the host running the IPX server.
- The IBM Extended Density Format (XDF) was used by IBM for software distribution on 5.25” and 3.5” media. XDF image files were often provided by IBM on CD-ROMs, bulletin boards, and FTP sites.
- A more realistic implementation of the Time Stamp Counter (TSC) found on Pentium and later CPUs, often used to determine the CPU clock. Now various benchmark software should display more realistic CPU speeds (e.g., HWINFO and SiSoft Sandra). Games don’t seem to be affected by this improvement.
- Software-initiated reset requests now restart the emulator instead of crashing it. The reset message has been improved and now includes a countdown counter.
Full PR list of miscellaneous enhancementsFull PR list of miscellaneous fixesFull PR list of documentation-related changesFull PR list of project maintenance related changesFull PR list of other changes
Localisation¶
- Update Dutch, Italian, Polish, Portugese, and Spanish translations.
- Use uncompressed CPI code page files instead of the compressed FreeDOS-specific CPX format. This improves code page switching performance, which was rather slow with low
cpu_cyclessettings. - Ensure all platform-specific translatable strings are visible to the translators.
Full PR list of localisation-related changes
Contributors¶
The following commit authors, sponsors, supporters, and backers all invested their time or funds into the 0.82 release effort. Thank you!
Contributors are listed in alphabetic order.
Thank you for considering supporting our work through a donation on GitHub Sponsors orOpen Collective. Your contribution helps us purchase the necessary hardware and licenses to keep our project going.
0.82 commit authors¶
- altiereslima
- Arcnor
- bluddy
- classilla
- dreamer
- farsil
- FeralChild64
- ftortoriello
- Grounded0
- interloper98
- japsmits
- johnnovak
- Kappa971
- kcgen
- keenanweaver
- kklobe
- LowLevelMahn
- MeAreJeenius
- rderooy
- Ringdingcoder
- shermp
- stackErr-NameNotResolved
- strikersix23
- Torinde
- weirddan455
0.82 sponsors¶
- Antti Peltola
0.82 supporters¶
- Wengier Wu
0.82 backers¶
- BenBudr
- Burrito78
- Diduz
- Florent Wagner
- Hannu Hartikainen
- Hugo Lucorcio
- Robin Mattheussen
Thank you¶
We are grateful for all the community contributions and the original DOSBox project, on which DOSBox Staging is based.
Clock Signal (CLK) version 2024-10-19
Mise à jour
- Logos
- Logos
- Logos
- Logos
- Logos
Version
2024-10-19
Body
Multi émulateur open source assez jeune demandant OSX 10.13 minimum et supportant les puces Apple Silicon (architecture Arm64).
Les plateformes suivantes sont émulables :
Acorn Electron, Amstrad CPC
Le journal des nouveautés qui font rêver les nostalgiques
Changelog
Vita3k version auto build 3666
Mise à jour
- Logos
- Logos
- Logos
Version
auto build 3666
Body
Tout premier émulateur Sony PS Vita qui n'émule actuellement que des homebrew bien que certains visuels de jeux commerciaux arrivent à s'afficher.
VirtualBox version 7.1.4
Mise à jour
- Logos
- Logos
- Logos
- Logos
Version
7.1.4
Body
Virtualiseur x86_64, il vous faut donc impérativement un Mac avec processeur Intel pour en profiter. A noter que le logiciel est sous licence GPL donc gratuit.
Le journal des nouveautés qui font rêver les nostalgiques
Changelog